Sulphur pyrite processing plant solution: The right pyrite (FeS₂) beneficiation route depends on the character of the ore. For the different types of pyrite ore, GravityMineral offers several circuits built around gravity separation as the core, supported by flotation, magnetic separation or combined processes to guarantee the best possible result.
For coarse-grained, simply composed pyrite ore, GravityMineral recommends gravity separation alone (jig + spiral concentrator + shaking table) — the lowest capital cost, the lowest operating cost and the lightest environmental burden. Only where the ore is very finely disseminated or carries complex associations are flotation or magnetic separation introduced as a supplement. Each process can be used on its own or in combination, fully tailored to your ore.
What Is Sulphur Pyrite Ore?
Sulphur pyrite (mainly iron disulfide, FeS₂) is the principal mineral raw material for extracting sulphur and manufacturing sulphuric acid, and an important chemical feedstock. It has a relatively high specific gravity (about 5.0 g/cm³) and is brittle, commonly occurring with quartz, calcite and base-metal sulphide ores.
Because the density contrast is pronounced, gravity separation is the most economical and most direct method for coarse-grained pyrite. Where the ore liberates well and is coarse, jigs and shaking tables alone can produce a specification sulphur concentrate. Where the ore is very finely disseminated (−0.074 mm) or carries complex associations, gravity cannot recover the ultrafine particles and flotation or magnetic separation must be added.
20 yearsFocused on mineral processing equipment manufacturing
50+ countriesPyrite processing lines exported and commissioned
500+ projectsGlobal mineral processing project experience base
35%China market share in gravity separation equipment
Pyrite Gravity Separation Flowsheet (Recommended Core Route)
For coarse-grained pyrite, GravityMineral recommends a three-stage gravity circuit — "jig – spiral concentrator – shaking table" — delivering the highest recovery at the lowest cost.
Stage 1: Crushing and Screening
Run-of-mine ore passes through a two-stage closed crushing circuit with a jaw crusher and a cone crusher, and a vibrating screen classifies the material to the size range required for gravity separation.
Stage 2: Gravity Roughing and Scavenging
- Coarse fraction (+2 mm): fed to a sawtooth-wave jig for roughing, rapidly recovering the bulk of the heavy pyrite.
- Fine fraction (−2 mm): fed to FRP spiral concentrators for scavenging, recovering further fine heavy minerals while rejecting large volumes of light gangue.
Stage 3: Gravity Cleaning
The mixed rougher concentrate from the jigs and spirals reports to 6-S shaking tables for cleaning; through water flow and deck vibration the tables separate pyrite completely from residual gangue, producing a high-grade sulphur concentrate.
Stage 4: Supplementary Processes (depending on the ore)
- Flotation supplement: if fine pyrite is still lost in the gravity tailings, flotation cells can be added as a scavenging backup.
- Magnetic supplement: if the ore has a high iron content, a high-gradient magnetic separator can be added to remove magnetic iron impurities.

Core Equipment Configuration and Selection for a Pyrite Processing Plant
GravityMineral supplies modular equipment configurations: depending on the ore you can choose gravity alone, gravity + flotation, gravity + magnetic separation or other combinations. The table below lists the core equipment and duty stations used in a pyrite beneficiation plant.
| Process type |
Main equipment |
Technical features |
| Gravity roughing |
Sawtooth-wave jig |
Treats 0–10 mm; efficient recovery of coarse pyrite. |
| Gravity scavenging |
FRP spiral concentrator |
Treats 0.02–2 mm; zero-power, high-capacity scavenging. |
| Gravity cleaning |
6-S shaking table |
Treats 0.074–2 mm; high separation precision and specification concentrate. |
| Flotation (optional) |
Mechanical flotation cells |
Cell volume 4–16 m³; recovers fine and complex associated pyrite. |
| Magnetic separation (optional) |
High-gradient magnetic separator |
Adjustable field intensity 0.8–1.5 T; removes magnetic iron impurities. |
Target Technical Indicators and System Advantages
Technical targets
- Capacity: 5–50 t/h (expandable on request).
- Concentrate grade: sulphur (S) ≥ 35%–45% (depending on feed grade).
- Gravity recovery: above 80% achievable on coarse-grained ore.
- Specific water consumption (after recirculation): ≤ 1.5 m³/t.
System advantages
- Flexible configuration: the optimum process combination is selected to suit the ore — gravity first for coarse material, flotation as backup for fines.
- Economical and practical: gravity separation has low capital cost and zero reagents, sharply reducing cost per tonne and delivering a high return on investment.
- Clean and energy-efficient: process water in the gravity stage is recirculated and pollutant discharge is low, meeting environmental requirements.
Why Build Your Pyrite Plant with GravityMineral
Pyrite projects typically face widely varying ore properties, difficulty choosing between process routes, and limited capital budgets. The mineral processing industry does not lack equipment — what it lacks is a partner that understands gravity, flotation and magnetic separation alike, and can tailor the optimal process combination for you.
| Common problem |
GravityMineral's solution |
| Uncertain whether to use gravity, flotation or magnetic separation |
Ore amenability testwork identifies the most suitable process combination, so you don't spend money on the wrong route. |
| Very fine dissemination gives poor gravity recovery |
A flotation stage is added after gravity separation as a backup, recovering the ultrafine pyrite. |
| Design institute drawings and equipment supply are disconnected, so interfaces mismatch |
Equipment manufacturing, flowsheet design and on-site commissioning sit within one closed-loop team — the interfaces never clash. |
- 20 years focused on gravity separation: two decades of building spiral concentrators, jigs and shaking tables — which equipment suits which ore condition, which flowsheet suits which size fraction, all backed by retrievable historical experience.
- Full gravity / flotation / magnetic coverage: GravityMineral supplies not only gravity roughing and upgrading, but also supplementary equipment such as flotation cells and high-gradient magnetic separators.
- 50+ countries, 500+ global projects: pyrite operations in Southeast Asia, base-metal-associated sulphur ores in South America and other real sites are the best test of equipment reliability and adaptability.
- Six official credentials: ISO9001, S-certified supplier, National High-Tech Enterprise, Jiangxi Provincial SRDI (specialised, refined, distinctive and innovative) SME, "Contract-Honoring and Credit-Worthy AA Enterprise", and "Major Taxpayer".


Pyrite Processing Plant Price and Investment Reference
There is no standard price for a pyrite processing plant — for the same throughput, differences in feed grade, dissemination size and process combination can change the equipment configuration and capital cost considerably. GravityMineral does not quote "paper prices" detached from the ore; instead we cost the full picture against the following cost structure:
- Equipment investment: crushing and screening stage, gravity stage (jigs / spiral concentrators / shaking tables), flotation stage (optional), magnetic stage (optional) and dewatering stage. Modular design allows staged investment to suit your budget.
- Free process design: flowsheet design, equipment selection and plant layout drawings are completed by GravityMineral's in-house design team — no external design institute required.
- Civil works and installation labour: civil construction and general installation labour are organised locally by the client; GravityMineral engineers provide on-site technical supervision.
- Operating cost (OPEX): zero reagents in the gravity stage, which sharply cuts flotation reagent cost; high water recirculation keeps overall operating cost low.
- Lead time and funding rhythm: manufacture of core standard equipment takes about 40–60 days; a full EPC turnkey project typically takes 7–12 months from contract effective date to reaching production targets.
Tell GravityMineral your ore type, feed grade, target throughput (tonnes per hour), feed size and site conditions, and our engineers will draw on a 500+ global project database to issue a transparent equipment selection list and quotation.
From Process Design to Production Targets: GravityMineral's Service Workflow
GravityMineral does more than sell equipment: we provide a full-cycle service covering mineral analysis, flowsheet design, equipment manufacturing and on-site installation and commissioning. A pyrite project typically advances through the following milestones:
- Requirement review (3–7 days): provide ore type, feed grade, target throughput, feed size and site conditions; GravityMineral proposes a preliminary direction at no charge.
- Process design and selection quotation (7–15 days): engineers combine orebody conditions with the 500+ global project database to fix either a pure gravity or a combined route and issue the equipment selection scheme, with selection and quotation delivered together.
- Drawing design (7–15 days): flowsheet diagram, equipment list, plant layout drawing and civil works condition drawings, completed by the in-house design team — design is never outsourced.
- Equipment manufacturing (40–60 days): scheduled across two in-house manufacturing bases, with quality control from raw material to factory test run.
- Shipping and logistics (30–60 days) + on-site installation and commissioning (60–150 days): engineers supervise installation on site, carry out single-machine and linked-circuit test runs and operator training — delivery is complete only when commissioning meets the targets.
A conventional mineral processing EPC turnkey project typically takes 7–12 months from contract effective date to reaching production targets.
Related Gravity–Flotation Combined Process Solutions
The core of pyrite separation is "early gravity recovery of coarse particles, flotation as backup for fines". If the ore you process also involves complex associations or fine dissemination, the following solutions may offer useful reference:
Pyrite Processing: Frequently Asked Questions (FAQ)
Q1: Should pyrite be processed by gravity, flotation or magnetic separation?
A: It depends on the dissemination size and mineral composition of the ore. For coarse-grained (+0.5 mm), simply composed ore, gravity separation (jig + spiral concentrator + shaking table) is the first choice — lowest cost and most environmentally friendly. For fine dissemination (−0.074 mm) or complex associated ore, flotation is required. Where iron content is high and iron must be removed, magnetic separation can be added. In many cases the combined route of "gravity rejection + flotation cleaning" gives the best and most economical result.
Q2: Why is gravity separation preferred for coarse-grained pyrite?
A: Gravity equipment (jigs, spiral concentrators) consumes zero reagents and has very low operating cost. In coarse-grained pyrite the minerals are well liberated, so gravity separation delivers a specification concentrate directly. Compared with all-flotation, gravity avoids expensive grinding and reagent costs, giving a higher return on investment.
Q3: Roughly how much does a complete pyrite processing plant cost?
A: The actual cost depends on your throughput (tonnes per hour), feed grade and target concentrate specification. Once GravityMineral understands the ore conditions, we issue a transparent equipment list and quotation covering the jaw crusher, cone crusher, jigs, spiral concentrators and shaking tables.
Q4: If the feed has a high clay content, will that affect gravity separation?
A: Yes. High clay content seriously interferes with gravity separation. GravityMineral installs a trommel scrubber or trommel screen at the front of the circuit to wash and deslime first. Only washed pulp enters the jigs and spiral concentrators, preventing fine slimes from coating the pyrite and causing losses.
Q5: How are the fine slimes in the tailings handled? Will they pollute the environment?
A: No. GravityMineral installs a thickener and filter press at the end of the circuit. After thickening and settling, the slurry is filter-pressed into dry cake for stacking, while the clear water is returned for reuse. This achieves zero discharge and saves a significant amount of water.
Q6: Can you supply a single jig? What if we want to expand later?
A: Yes, single units can be supplied. GravityMineral supports modular purchasing: you can start with a crushing + jigging set and add the flotation and dewatering stages later when budget allows. Because the interfaces are reserved in the original design, expansion does not require rebuilding — you simply add equipment in proportion.
Q7: Our feed grade fluctuates a lot — can your flowsheet cope?
A: Yes. Process design accounts for the ore's variation range and operating tolerance. Throughput, stroke and slope of the gravity stage (jigs and shaking tables) can all be adjusted to the feed grade. If variation exceeds the normal range, engineers set the operating parameters for each condition during on-site commissioning.
Q8: For projects in Africa or Southeast Asia, can you send engineers for on-site installation?
A: Yes. GravityMineral's products and services have been exported to more than 50 countries. We dispatch on-site engineers to supervise equipment positioning, single-machine and linked-circuit test runs, recovery adjustment, and to train your local operating team until the line runs stably and meets the targets.


EPC Turnkey: End-to-End Pyrite Beneficiation Engineering
GravityMineral provides a comprehensive turnkey EPC solution for your pyrite project. From ore amenability testwork and process route comparison through equipment manufacturing and on-site commissioning, GravityMineral ensures your plant achieves the maximum return on investment.
- Solution design: a flowsheet and equipment configuration customised to the ore — gravity alone, or a combined gravity–flotation–magnetic route.
- Engineering services: production line planning and 3D drawing design completed in-house — medium and large projects can save hundreds of thousands of dollars in design fees.
- Equipment manufacturing and supply: core gravity, flotation and magnetic equipment is produced at GravityMineral's two in-house manufacturing bases, with quality control from raw material procurement to factory test run.
- Installation and commissioning: engineers dispatched worldwide to supervise installation, single-machine and linked-circuit test runs, recovery adjustment and operator training — delivery is complete only when commissioning meets the targets.
- After-sales and optimisation: quality responsibility during the warranty period; after warranty, spare parts supply, technical consultation and process optimisation, with response within 24 hours.
Talk to the GravityMineral engineering team for a customised pyrite plant layout proposal and equipment quotation.