Titanium placer (ilmenite) processing plant solution (gravity + magnetic): Titanium placer sands are an important ilmenite resource, characterised by wide distribution and easy mining. Drawing on years of gravity and magnetic separation experience, GravityMineral has developed an efficient combined route for titanium placers: gravity pre-concentration followed by deep magnetic purification.
The ilmenite sand processing plant upgrades ilmenite by gravity concentration in spiral concentrators and shaking tables, then performs deep purification with multi-stage magnetic separation to produce a high-quality titanium concentrate of TiO₂ ≥ 48%. The solution offers low capital cost, fast payback, low operating cost and a clean, pollution-free process — particularly suited to ilmenite recovery from beach and inland placer sands.
What Are Titanium Placer Sands?
Placer ilmenite — titanium placer sands, also called ilmenite placers — forms on beaches or river flats after long-term weathering, water transport and deposition of primary ilmenite orebodies. Beach sand ilmenite (FeTiO₃) has a high specific gravity (4.5–4.8 g/cm³) and is weakly magnetic, commonly occurring with other heavy minerals such as zircon, rutile and monazite. Because nature has already liberated the grains, placer ilmenite needs washing and gravity separation rather than crushing and grinding.
Because nature has already done the sorting, ilmenite is largely liberated from the gangue — so the expensive crushing and grinding required for primary hard-rock ore is completely unnecessary. The core difficulty in titanium placer processing is that ilmenite has a density close to zircon and rutile, so gravity separation alone cannot split them. GravityMineral's standard titanium placer gravity process therefore uses a combined "gravity pre-concentration + deep magnetic purification" circuit: it rejects the bulk of the light silica sand while ensuring the final TiO₂ grade reaches 48% or above.
20 yearsFocused on mineral processing equipment manufacturing
50+ countriesTitanium placer processing lines exported and commissioned
500+ projectsGlobal mineral processing project experience base
35%China market share in gravity separation equipment
Three-Stage Titanium Placer Processing Flowsheet
GravityMineral's flowsheet is purpose-designed for ilmenite in beach or inland placer sands, exploiting the density and magnetic susceptibility contrasts for efficient separation.
Stage 1: Pre-treatment, Washing and Screening
Run-of-mine titanium placers contain impurities that must be removed before the material enters the precision pumping and gravity circuits. Ilmenite sand washing is therefore the first and most decisive step — clay left in the feed coats the ilmenite, disturbs density stratification and carries fine values straight to the tailings.
- Uniform feeding: ore from the hopper is fed evenly by a vibrating feeder to keep downstream operations stable. A grizzly removes large debris and gravel.
- Washing and screening: material enters a trommel screen or rotary scrubber, where high-pressure water jets wash it thoroughly to remove −2 mm slimes and impurities. The feed is classified into +2 mm and −2 mm fractions to improve separation efficiency.
Stage 2: Gravity Upgrading System
The objective of this stage is to reject the overwhelming majority of light quartz / silica sand without consuming any electrical power.
- Spiral roughing: treats the −2 mm fraction with feed pulp density strictly controlled at 30–35%. The slope angle is adjusted to optimise separation, giving initial ilmenite upgrading to a rougher concentrate of 30–35% TiO₂.
- Shaking table cleaning: deep cleaning of the rougher concentrate; stroke and stroke rate are tuned to optimise separation precision, producing a table concentrate of TiO₂ ≥ 45%.
Stage 3: Deep Magnetic Purification
The gravity concentrate must be further purified to reach metallurgical specification.
- Multi-stage magnetic separation: permanent-magnet drum magnetic separators carry out multi-stage separation. Medium-intensity magnetic separation splits ilmenite from non-magnetic minerals, while high-intensity magnetic separation performs further purification and removes weakly magnetic impurities.
- Final product: a specification titanium concentrate of TiO₂ ≥ 48%.
Core Equipment Configuration and Selection for a Titanium Placer Processing Plant
The challenge in titanium placer processing lies in high-tonnage upgrading in the gravity stage and precise impurity removal in the magnetic stage. The table below lists the core equipment and duty stations used in an ilmenite sand processing plant.
| Process step |
Equipment |
Technical features |
| Feeding system |
Vibrating hopper |
Anti-blocking design for uniform feed. |
| Washing and screening |
Trommel screen and rotary scrubber |
Wear-resistant screen media, adjustable water pressure; strong washing and efficient desliming. |
| Gravity separation |
FRP spiral concentrator |
FRP construction, adjustable slope angle, high capacity. |
| Gravity cleaning |
6-S shaking table |
Adjustable stroke and stroke rate for high separation precision. |
| Magnetic separation |
Permanent-magnet drum magnetic separator |
Multi-stage magnetic system with adjustable field intensity, used to recover ilmenite. |
| Deep purification |
High-intensity magnetic separator |
Deep purification and removal of weakly magnetic impurities. |

Target Technical and Economic Indicators
Technical targets
- Capacity: 20–400 t/h (expandable on request).
- Target concentrate grade: TiO₂ ≥ 48% (commercial metallurgical grade).
- Recovery: ≥ 85%.
- Water consumption: 0.5–2 t per tonne of ore (recirculated in the gravity stage).
System advantages
- Low capital cost: equipment investment is 40% lower than with conventional processes.
- Low operating cost: no chemical reagent consumption and low energy use.
- Fast payback: high recovery ensures a rapid return on investment.
- Low maintenance: simple equipment structure that is easy to service.
Why Build Your Titanium Placer Plant with GravityMineral
Titanium placer projects typically face shifting mineral composition, difficulty separating ilmenite from zircon, and strict impurity limits. The mineral processing industry does not lack equipment — what it lacks is a partner that understands both gravity upgrading and magnetic cleaning, and can make the flowsheet work as one system.
| Common problem |
GravityMineral's solution |
| Ilmenite and zircon have similar specific gravity; gravity separation cannot split them |
A permanent-magnet drum separator is installed after gravity separation, using ilmenite's weak magnetic response to separate it precisely from zircon. |
| High salinity and humidity on beach sites cause rapid equipment corrosion |
Spiral concentrators use FRP with a corundum lining — wear-resistant and corrosion-resistant for harsh conditions. |
| Design institute drawings and equipment supply are disconnected, so interfaces mismatch |
Equipment manufacturing, flowsheet design and on-site commissioning sit within one closed-loop team — the interfaces never clash. |
- 20 years focused on gravity separation: two decades of building spiral concentrators and shaking tables — which equipment suits which ore condition, which flowsheet suits which size fraction, all backed by retrievable historical experience.
- Full gravity / magnetic coverage: GravityMineral supplies not only gravity roughing and upgrading, but also deep-cleaning equipment such as permanent-magnet drum magnetic separators.
- 50+ countries, 500+ global projects: Southeast Asian beach placer operations and other real sites are the best test of equipment reliability and adaptability.
- Six official credentials: ISO9001, S-certified supplier, National High-Tech Enterprise, Jiangxi Provincial SRDI (specialised, refined, distinctive and innovative) SME, "Contract-Honoring and Credit-Worthy AA Enterprise", and "Major Taxpayer".
Titanium Placer Processing Plant Price and Investment Reference
There is no standard price for a titanium placer plant — for the same throughput, differences in feed grade, mineral assemblage and site conditions can change the equipment configuration and capital cost considerably. GravityMineral does not quote "paper prices" detached from the ore; instead we cost the full picture against the following cost structure:
- Equipment investment: washing and screening stage, gravity stage (spiral concentrators / shaking tables), magnetic stage (permanent-magnet drum / high-intensity magnetic separators) and dewatering stage. Modular design allows staged investment to suit your budget.
- Free process design: flowsheet design, equipment selection and plant layout drawings are completed by GravityMineral's in-house design team — no external design institute required.
- Civil works and installation labour: civil construction and general installation labour are organised locally by the client; GravityMineral engineers provide on-site technical supervision.
- Operating cost (OPEX): no reagents and no chemicals in the gravity stage, high water recirculation — overall operating cost is low.
- Lead time and funding rhythm: manufacture of core standard equipment takes about 40–60 days; a full EPC turnkey project typically takes 7–12 months from contract effective date to reaching production targets.
Tell GravityMineral your ore type, feed grade, target throughput (tonnes per hour), feed size and site conditions, and our engineers will draw on a 500+ global project database to issue a transparent equipment selection list and quotation.

From Process Design to Production Targets: GravityMineral's Service Workflow
GravityMineral does more than sell equipment: we provide a full-cycle service covering mineral analysis, flowsheet design, equipment manufacturing and on-site installation and commissioning. A titanium placer project typically advances through the following milestones:
- Requirement review (3–7 days): provide ore type, feed grade, target throughput, feed size and site conditions; GravityMineral proposes a preliminary direction at no charge.
- Process design and selection quotation (7–15 days): engineers combine orebody conditions with the 500+ global project database to fix the gravity–magnetic route and issue the equipment selection scheme, with selection and quotation delivered together.
- Drawing design (7–15 days): flowsheet diagram, equipment list, plant layout drawing and civil works condition drawings, completed by the in-house design team — design is never outsourced.
- Equipment manufacturing (40–60 days): scheduled across two in-house manufacturing bases, with quality control from raw material to factory test run.
- Shipping and logistics (30–60 days) + on-site installation and commissioning (60–150 days): engineers supervise installation on site, carry out single-machine and linked-circuit test runs and operator training — delivery is complete only when commissioning meets the targets.
A conventional mineral processing EPC turnkey project typically takes 7–12 months from contract effective date to reaching production targets.
Other Gravity–Magnetic Combined Process Solutions
The core of titanium placer separation is "gravity upgrading + magnetic cleaning". If the ore you process also involves a complex heavy mineral assemblage, the following solutions may offer useful reference:
Titanium Placer Processing: Frequently Asked Questions (FAQ)
Q1: Why does titanium placer processing need a combined gravity + magnetic circuit?
A: In titanium placers, ilmenite commonly occurs with other heavy minerals such as zircon and rutile. Because their densities are close, gravity separation alone yields only a mixed heavy sand — it cannot produce high-purity ilmenite. Ilmenite, however, is weakly magnetic, so after gravity upgrading a magnetic separator uses the magnetic contrast to extract ilmenite from the mixed heavy sand.
Q2: Why is washing and desliming so critical in titanium placer processing?
A: Beach placers commonly contain fine slimes and organic impurities. If these are not washed out, the slimes coat the ilmenite surface and interfere with the density-based stratification in gravity separation, reducing recovery. GravityMineral installs a trommel screen and high-pressure water jets at the front of the circuit so that the pulp entering the gravity stage is clean and slime-free.
Q3: Roughly how much does a complete titanium placer processing plant cost?
A: The actual cost depends on your throughput (tonnes per hour), feed grade and target concentrate specification. Once GravityMineral understands the ore conditions, we issue a transparent equipment list and quotation covering the scrubber, spiral concentrators, shaking tables and magnetic separators.
Q4: What if I need two products — titanium concentrate and zircon?
A: GravityMineral can design a multi-product integrated recovery circuit for you. After gravity upgrading and magnetic extraction of ilmenite, the remaining tailings can be further treated with electrostatic separators to recover zircon and rutile — multi-mineral recovery that maximises the economic value of the deposit.
Q5: How are the fine slimes in the tailings handled? Will they pollute the environment?
A: No. GravityMineral installs a thickener and filter press at the end of the circuit. After thickening and settling, the slurry is filter-pressed into dry cake for stacking, while the clear water is returned for reuse. This achieves zero discharge and saves a significant amount of water.
Q6: Can you supply a single spiral concentrator? What if we want to expand later?
A: Yes, single units can be supplied. GravityMineral supports modular purchasing: you can start with a washing + spiral concentrator set and add the shaking table and magnetic stages later when budget allows. Because the interfaces are reserved in the original design, expansion does not require rebuilding — you simply add equipment in proportion.
Q7: Our feed grade fluctuates a lot — can your flowsheet cope?
A: Yes. Process design accounts for the ore's variation range and operating tolerance. Throughput, stroke and slope of the gravity stage (spiral concentrators and shaking tables) can all be adjusted to the feed grade. If variation exceeds the normal range, engineers set the operating parameters for each condition during on-site commissioning.
Q8: For projects in Africa or Southeast Asia, can you send engineers for on-site installation?
A: Yes. GravityMineral's products and services have been exported to more than 50 countries. We dispatch on-site engineers to supervise equipment positioning, single-machine and linked-circuit test runs, recovery adjustment, and to train your local operating team until the line runs stably and meets the targets.
Global Titanium Placer Project Installations

EPC Turnkey: End-to-End Titanium Placer Gravity Engineering
GravityMineral provides end-to-end technical support to titanium placer projects worldwide. Because our flowsheet is 100% physical separation (no chemical reagents, zero wastewater discharge), environmental permitting is substantially simplified.
- Solution design: a gravity–magnetic flowsheet and equipment configuration tailored to the specific characteristics of your ore sample.
- Engineering services: production line planning and 3D drawing design completed in-house — medium and large projects can save hundreds of thousands of dollars in design fees.
- Equipment manufacturing and supply: core gravity and magnetic equipment is produced at GravityMineral's two in-house manufacturing bases, with quality control from raw material procurement to factory test run.
- Installation and commissioning: engineers dispatched worldwide to supervise installation, single-machine and linked-circuit test runs, recovery adjustment and operator training — delivery is complete only when commissioning meets the targets.
- After-sales and optimisation: quality responsibility during the warranty period; after warranty, spare parts supply, technical consultation and process optimisation, with response within 24 hours.
Talk to the GravityMineral engineering team for a customised titanium placer plant layout proposal and equipment quotation.